Super Soaker Headquarters
October 20, 2020, 12:56:40 pm
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to SMF For Free
 
  Home Help Search Staff List Login Register  

CPS Soakers

Pages: 1 [2]
  Print  
Author Topic: CPS Soakers  (Read 707 times)
WaterWolf
Corporal
*
Posts: 27



View Profile
« Reply #15 on: August 04, 2007, 08:13:22 pm »

I see. So how about now, what kind of range/power/stream boosts are you getting?
Just approximations are fine, I don't need hard statistics right now.
Report Spam   Logged

The Maple-Mountain-Marines.

Terrifying, but oddly refreshing.
-B.D.
DX
Admin - Sergeant Major
Specialist
*
Posts: 20


Wicked


View Profile WWW
« Reply #16 on: August 04, 2007, 08:23:17 pm »

I honestly don't know, the pc has not been aligned correctly in tests, therefore I do not trust the results.  Basically, the gun leaks a ton of water because the pc is not staying fully in its proper connection.
Report Spam   Logged
WaterWolf
Corporal
*
Posts: 27



View Profile
« Reply #17 on: August 04, 2007, 09:06:42 pm »

Lots of balloon skins making the PC connector too thick to fit?
What about opening the PC itself to expose the rubber hart, then stretching the balloons over the outside of it?
This would probably give you the same boost in power, but without the issue of fitting the connectors back together.
Then again, I've never preformed a K-mod, so I only have this as a theory, but perhaps you could implement it.
Report Spam   Logged

The Maple-Mountain-Marines.

Terrifying, but oddly refreshing.
-B.D.
DX
Admin - Sergeant Major
Specialist
*
Posts: 20


Wicked


View Profile WWW
« Reply #18 on: August 04, 2007, 09:14:26 pm »

The pc closes easily.  It does not stay put in the outer connection that keeps the inner connection in.  It has to go further in, but it like won't.  Nibordude also ran into this problem and has not fixed it.  This is my first experience with such a fitting issue, no other gun has ever done it to me.
Report Spam   Logged
WaterWolf
Corporal
*
Posts: 27



View Profile
« Reply #19 on: August 04, 2007, 09:34:53 pm »

Hmm, so do you believe the inside-out K-mod idea would have no effect on this?
Did Nibor run into this issue on the same model of gun? Or was it a different one?
Report Spam   Logged

The Maple-Mountain-Marines.

Terrifying, but oddly refreshing.
-B.D.
DX
Admin - Sergeant Major
Specialist
*
Posts: 20


Wicked


View Profile WWW
« Reply #20 on: August 04, 2007, 10:08:28 pm »

I don't think the inside-out would solve the problem.  It might help, but the pc really has to be firmly connected all the way in.  It only holds pressure normally if a certain part of it is in far enough, it's weird and hard to explain.
Report Spam   Logged
WaterWolf
Corporal
*
Posts: 27



View Profile
« Reply #21 on: August 05, 2007, 05:47:44 am »

So had Nibor run into this problem on another CPS 15/1700? Or was it a different one?
Report Spam   Logged

The Maple-Mountain-Marines.

Terrifying, but oddly refreshing.
-B.D.
DX
Admin - Sergeant Major
Specialist
*
Posts: 20


Wicked


View Profile WWW
« Reply #22 on: August 05, 2007, 10:48:35 am »

His is actually a stock 1500 that he opened for a rubber band repair.
Report Spam   Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum

Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy